Dividing Scenes
15-May-2013
8201851000
Solution
You can divide AVCHD scenes in order to leave out the best parts and later cut out the rest.
1. Set the power switch to <MEDIA>.
1 Play back the desired scene.
3. Touch the screen to display the playback controls.
4. Touch [ 
] to pause the playback at the point where you want to divide the scene.
] to pause the playback at the point where you want to divide the scene.
5. Touch [ 
].
].
6. Touch [Divide].
7. Bring the scene to a precise point, if necessary.
Playback controls will appear on the screen. Use any special playback modes (fast playback, frame reverse/advance) as necessary to locate the desired point
 During playback pause |  /  | Frame reverse/advance* |
 During playback |  /  | Fast playback backward/forward |
8. Stop playback momentarily at the position you want to divide.
9. Touch [Divide].
10. Touch [Yes].
The video from the division point to the end of the scene will appear as a new scene in the index screen.
NOTE
- When advancing/reversing frames while dividing the scenes, the interval between frames is about 0.5 seconds.
- If the scene cannot be divided at the point where you paused the playback, advance/reverse a frame and then divide the scene.
- During the playback of a scene that was divided, you may notice some anomalies in the picture/sound at the point where the scene was cut.
- Scenes that are too short (less than 3 seconds) cannot be divided.
- Scenes cannot be divided within 1 second from the beginning or the end of the scene.