Specifying a portion of an image to save separately (Cropping)
11-Sep-2013
8201777800
Solution
The following explains the procedure for specifying a portion of an image to save as a separate image file.
IMPORTANT
- Editing is not possible for images shot at a resolution of [
], or resized to [ ]. - The position and shape of the operation buttons may differ according to the model you use.
1. Press the <
> button to enter Playback mode.
> button to enter Playback mode.2. Press the <MENU> button, and then choose [Cropping] on the [ 
] tab.
] tab.
3. Press the <
><
> buttons to choose an image, and then press the <FUNC./SET> (
) button.
><> buttons to choose an image, and then press the <FUNC./SET> () button.
4. Adjust the cropping area.
A frame is displayed around the portion of the image to be cropped.
The original image is shown in the upper left, and a preview of the image as cropped is shown in the lower right.
- To resize the frame, move the zoom lever.
- To move the frame, press the <
><
><><> buttons. - To change the frame orientation, press the <FUNC./SET> () button.
- Press the <MENU> button.
5. Press the <><> buttons to choose [OK], and then press the <FUNC./SET> () button.
><> buttons to choose [OK], and then press the <FUNC./SET> () button.The image is now saved as a new file.
6. Press the <MENU> button. [Display new image?] is displayed.
Press the <><> buttons to choose [Yes], and then press the <FUNC./SET> () button.
><> buttons to choose [Yes], and then press the <FUNC./SET> () button.
The saved image is now displayed.
NOTE
- Images supported for cropping will have the same aspect ratio after cropping.
- Cropped images will have a smaller resolution than uncropped images.
- If you crop still images shot using Face ID, only the names of the people left in the cropped image will remain.
This completes the steps for specifying a portion of an image to save as a separate image file.