The power of printer automatically turns off

    12-Nov-2012
    8201713500

    Solution

    [Cause]
    Shutdown timer is set other than [off].
    After the printer goes into Sleep Mode, power will be turned off automatically when the situation that the printer is not operated continues until the time being set in advance by operation panel.
    When the firmware was updated to the following versions, set value of shutdown timer will be automatically set to 8 hours.
    [Setup time]
    off /5 min. /10 min. /30 min. /1 hour /4 hours /8 hours* /12 hours
    * Factory default setting/Initial value after updating version of firmware

    Models and Firmware Version
    Model NameFirmware Ver.
    iPF94001.03 or later
    iPF9400S1.01 or later
    iPF84001.07 or later
    iPF83001.26 or later
    iPF8300S1.07 or later
    iPF8251.08 or later
    iPF8151.08 or later
    iPF7551.30 or later
    iPF7501.30 or later
    iPF64501.08 or later
    iPF64001.08 or later
    iPF6300S1.06 or later
    iPF6551.30 or later
    iPF6501.30 or later
    iPF6101.41 or later
    iPF6051.07 or later
    iPF51001.43 or later
    iPF5101.41 or later

    How to change the setup time (Large panel)
    Please follow the procedures listed below.

    1. On the Tab Selection screen of the Control Panel, press or to select the Settings/Adj. tab


    NOTE
    • If the Tab Selection screen is not displayed, press the Menu button.

    2. Press or to select [System Setup], and then press the [OK] button.



    3.Press or to select [Shut Down Timer] , and then press the [OK] button.



    4. Press or to select [off/5 min./10 min./30 min./1 hour/4 hours/8 hours/12 hours] , and then press the [OK] button.





    How to change the setup time (Small panel)

    1. Press the [Menu] button and [MAIN MENU] will be displayed.
    2. Press or to select [System Setup], and then press the button.



    3.Press or to select [Shut Down Timer] , and then press the button.



    4.Press or to select [off/5 min./10 min./30 min./1 hour/4 hours/8 hours/12 hours] , and then press the [OK] button.