Issue
The following are probable causes when the message <41 CHK PAPER SZE> appears in the display on the control panel. Follow the described instructions.
Cause and Solution
Cause 1:
There is a possibility that the size of the paper loaded in the multi-purpose tray or paper cassette is different from the setting for TRAY PAPER SIZE, CASSETTE2 SIZE, CASSETTE3 SIZE, or CASSETTE4 SIZE specified from the computer or control panel.
Remedy:
Match the size specified in TRAY PAPER SIZE, CASSETTE2 SIZE, CASSETTE3 SIZE, or CASSETTE4 SIZE and the size of the loaded paper, and then press [Online].
See Related Information about the following title(s) at the end of this page as needed.
Cause 2:
There is a possibility that you are using UFR II Printer Driver, and you loaded custom paper of its long edges 297.0 mm or less and printed when TRAY PAPER SIZE, CASSETTE2 SIZE, CASSETTE3 SIZE, or CASSETTE4 SIZE in the FEEDER MENU options in the SETUP menu was set to MIXED SIZE.
Remedy:
Load the paper in landscape orientation, then print again.
See Related Information about the following title(s) at the end of this page as needed.
Cause 3:
There is a possibility that SPECIAL MODE J in the USER MAIN. options in the SETUP is set to OFF.
Remedy:
Set SPECIAL MODE J to ON, then print again.
See Related Information about the following title(s) at the end of this page as needed.