The message <PC LOAD "size"> appears in the display on the control panel.
21-Mar-2012
8201492500
Issue
The following are probable causes when the message <PC LOAD "size"> appears in the display on the control panel. Follow the described instructions.
Cause and Solution
Cause:
There is a possibility that the paper of the size specified in the application is not loaded in the paper cassette or manual feed slot, or the paper source for the different paper size is selected.
Remedy 1:
Load the paper of the size selected in the application (or the one specified by scaling factors).
Remedy 2:
If you are using the manual feed slot, check SLOT PAPER SIZE, and when the paper size does not match the size specified in the application, specify the setting properly.
Remedy 3:
Press the 
(Feeder Selection) key, then select the paper cassette in which the paper of the matched size is loaded.
(Feeder Selection) key, then select the paper cassette in which the paper of the matched size is loaded.Remedy 4:
Press the 
(Online) key, then print to the currently loaded paper forcibly. If you are using the manual feed slot, the setting for SLOT PAPER SIZE automatically changes to the setting specified in the application.
(Online) key, then print to the currently loaded paper forcibly. If you are using the manual feed slot, the setting for SLOT PAPER SIZE automatically changes to the setting specified in the application.See Related Information about the following title(s) at the end of this page as needed.