Solution
You can copy documents collated into sets arranged in page order. This feature can be used together with both Two-Sided Copying and 2 on 1 Combination.
1. Set documents.
Place the first page on the platen glass if you are not using the ADF.
2. Press [COPY].
NOTE
If [AUTO COLLATE] is set to [COLLATE] in [STANDRD SETTINGS] in [COPY SETTINGS], skip steps 3 and 4.
3. Press [Collate].
[COLLATE] appears in the LCD.
4. Press [Left cursor] or [Right cursor] to select [ON] then press [OK].
5. Use the numeric keys to enter the desired copy quantity (1 to 99).
6. Press [Start].
When the documents are loaded in the ADF, collate copying starts and no further operation is required.
7. Place the next page of the document on the platen glass then press [Start].
Repeat this step to scan all pages. The machine prints only one copy of each page.
8. Press [OK].
- The machine prints the remaining sets of copies.
- To cancel all settings, press [Reset].
NOTE
When scanning multiple page documents, [MEMORY FULL] may appear in the LCD and scanning may be canceled. If this happens press [Stop] to return to standby mode.