Copying data from the built-in memory to an SD memory card
16-Feb-2011
8201101400
Solution
You can copy your recordings only one-way: from the built-in memory or from memory card A to memory card A. Scenes and photos will be copied from the index screen you selected to the corresponding index screen on the memory card.
NOTE
- You cannot copy data from the built-in memory or Card B to Card A, or from Card A or Card B to the built-in memory.
1. Make sure the memory card to which you want to copy recordings is inserted into memory card slot 
.
.
2. Press < 
> to switch to movie playback mode.
> to switch to movie playback mode.
3. Open the index screen that contains the scenes you want to copy.
Touch [ 
], selected the [ 
] tab or [ 
] tab, then select [ Original ] or [ Playlist ]* .
], selected the [ ] tab or [ ] tab, then select [ Original ] or [ Playlist ]* .
*When you copy scenes from the [ Playlist ] index screen (including the playlist of video snapshot scenes), you cannot select individual scenes; instead, the entire playlist will be copied. Skip directly to step 5.
REFERENCE
- To copy scenes all the recorded on a specific date:
Select [ Scenes by Date ] on the screen that appears after touching [ All Scenes ]. The calendar will appear, so touch a shooting date that contains the scenes you want to copy.
3. Touch [ 
] to open the scene selection screen.
] to open the scene selection screen.
4. Touch on the individual scenes you want to copy.
- A checkmark [
] will appear on scenes selected. Touch a selected scene again to remove the checkmark. - To select all the scenes at once: Touch [ Select All ] instead of touching individual scenes. (Remove in advance any checkmarks from scenes you may have selected individually.)
5. Copy the scenes.
5-1. Touch [ Edit ].
5-2. Touch [ Copy ].
5-3. Touch [ Yes ].
5-4. Touch [ OK ].
CAUTION
- Observe the following precautions while the ACCESS indicator is on or flashing. Failing to do so may result in permanent data loss.
- Do not open the double memory card slot cover.
- Do not disconnect the power source or turn off the camcorder.
- Do not change the camcorder's operating mode.
- When copying photos onto an Eye-Fi card in memory card slot , photos will be uploaded automatically if you are within the range of a configured network. Always verify that Eye-Fi cards have been approved in the country/region of use.
NOTE
- In the following cases, you will not be able to copy recordings to the memory card:
- If the double memory card slot is open.
- If the LOCK switch on memory card B is set to prevent writing.
- If there is no memory card in memory card slot .
.- Scenes that were edited using the supplied software VideoBrowser and were then transferred back to the camcorder cannot be copied to the memory card.
1. Make sure the memory card to which you want to copy recordings is inserted into memory card slot .
.2. Press < > to switch to photo playback mode.
> to switch to photo playback mode.3. Open the index screen that contains the scenes you want to copy.
- Touch [ ], selected the [ ] tab or [ ] tab, and then touch [ Photos ].
4. In single photo view, select the photo you want to copy.
5. Touch the screen to display the playback controls.
6. Copy the photo.
6-1. Touch [ Edit ].
6-2. Touch [ Copy ].
6-3. Touch [ Proceed ].
6-4. Touch [ Yes ].
REFERENCE
- Drag your finger left/right to select another photo to copy.
7. Touch [ 
].
].
1. Make sure the memory card to which you want to copy recordings is inserted into memory card slot .
.2. Press < > to switch to playback mode.
> to switch to playback mode.3. Open the [Photos] index screen.
- Touch [ ], selected the [ ] tab or [ ] tab, and then touch [ Photos ].
4. Touch [ ] to open the photo selection screen.
] to open the photo selection screen.
5. Touch on the individual photos you want to copy.
- A checkmark [ ] will appear on photos selected. Touch a selected photo again to remove the checkmark.
- To select all the photos at once: Touch [ Select All ] instead of touching individual photos. (Remove in advance any checkmarks from photos you may have selected individually.)
6. Copy the photos.
6-1. Touch [ Edit ].
6-2. Touch [ Copy ].
6-3. Touch [ Yes ].
6-4. Touch [ OK ].
CAUTION
- Observe the following precautions while the ACCESS indicator is on or flashing. Failing to do so may result in permanent data loss.
- Do not open the double memory card slot cover.
- Do not disconnect the power source or turn off the camcorder.
- Do not change the camcorder's operating mode.
- When copying photos onto an Eye-Fi card in memory card slot , photos will be uploaded automatically if you are within the range of a configured network. Always verify that Eye-Fi cards have been approved in the country/region of use.
NOTE
- In the following cases, you will not be able to copy recordings to the memory card:
- If the double memory card slot is open.
- If the LOCK switch on memory card B is set to prevent writing.
- If there is no memory card in memory card slot .
.- If there is not enough space on memory card B, as many photos as possible will be copied before stopping the operation.