Issue
Image edges are blurred or white banding occurs
Cause and Solution
<Cause1> The Platen suction is too strong.
<Corrective Action1>
Set VacuumStrngth to Weakest.
<Corrective Action2>
Close the blue Switch on the platen so that it matches the paper size.
<Cause2> The Printhead is set too high.
<Corrective Action>
Lower the Printhead.
<Cause3> The type of paper specified in the printer driver does not match the type loaded in the printer.
<Corrective Action1>
Load paper of the same type as you have specified in the printer driver.
<Corrective Action2>
Make sure the same type of paper is specified in the printer driver as you have loaded in the printer.
1.Hold down the Stop button for a second or more to cancel printing.
2.Change the type of paper in the printer driver and try printing again.