Settings before Using the Scan to File Server Function (SMB)
19-Dec-2011
8200927800
Solution
Before using the Scan to File Server function (SMB), the following settings are required:
- Network settings
Connect the computer and the machine and set the IP address to communicate through a network.
- Setting the computer as a file server
Set the computer corresponding to your system environment.
- Setting the machine
Set the machine to be able to send documents to the file server.
1. Connect the LAN Cable.
2. Set the IP Address.
For instructions on how to set the IP address, see "Setting the IP Address."
Setup the computer as a file server.
File server settings vary depending on your system environment.
For instructions on how to setup the computer, see "Setting Shared Folder (Windows).":
After the file server is set up, set the machine to be able to send documents to the file server.
For instructions, see "Setting the Machine for Scan to File Server (SMB)."