Shooting subjects up close (PowerShot G12)

    21-Sep-2010
    8200922700

    Solution

      If you are shooting a subject at a close distance, and if the subject cannot be easily focused within the normal shooting range, switching the normal mode to the [Macro] () mode will make it easier to focus on the subject.
      NOTE
      The distance of each focusing range is as follows (from the end of the lens).
      • [Normal] () :1 cm (0.4 in.) - infinity (W)*, 30 cm (12 in.) - infinity (T)**
      • [Macro] () : 1 cm (0.4 in.) - 50 cm (1.6 ft.) (W)*, 30 cm (12 in.) - 50 cm (1.6 ft.) (T)**
      * (W) : When the camera is at maximum wide angle with the <Zoom Button> pressed and <Wide Angle> () selected (at the Wide-end).
      ** (T) : When the camera is at maximum telephoto with the <Zoom Button> pressed and <Telephoto> () selected (at the Tele-end).
      CAUTION
      • The following explanations are provided based on the assumption that the [Shooting Mode] is set to [Program] ().
      • In macro shooting, the edges of the image may be darkened if the flash fires.
      • To set the [Macro] (), it is necessary to set the [Shooting Mode] to one of the following modes.
      - [Manual] (), [Aperture Priority] (), [Shutter Speed Priority] (), [Program] (), [Color Accent] (), [Color Swap] (), [Nostalgic] (), [Stitch Assist] (), [Standard (Movie) ] (), [Color Accent (Movie) ] (), [Color Swap (Movie) ] ()


      1. Press the <Power> button on the camera.


      2. Press the <Macro> () button.




      3. The following screen appears.



      You can switch between [Normal] and [Macro] by pressing the < Macro > button ().


      If [Macro] () is indicated on the LCD Monitor, the camera is in [Macro] () mode.


      REFERENCE
      In macro shooting, try attaching the camera to a tripod and shooting with the selftimer to prevent the camera from moving and blurring the image.