Solution
Preview each photo from the memory card or USB flash drive on the LCD, to select and print the desired photo.
This section describes the procedure to print borderless photos on 4" x 6" / 10 x 15 cm photo paper.
*1 The machine can read up to 2000 photos.
1. Prepare for printing.
(1) Turn on the power.
(2) Load paper.
Here we load 4" x 6" / 10 x 15 cm photo paper in the Rear Tray.
NOTE
- When you print on A4 or Letter-sized plain paper, make sure that they are loaded in the Cassette. Load other sizes or types of paper in the Rear Tray.
(3) Open the Paper Output Tray gently, and open the Output Tray Extension.
2. Insert a memory card or USB flash drive.
(1) Select Photo
on the HOME screen.
The message "USB flash drive or memory card is not set." will appear.
(2) Insert a memory card or USB flash drive.
Memory card:
Insert it WITH THE LABELED SIDE FACING TO THE LEFT into the Card Slot.
USB flash drive:
Insert it into the Direct Print Port.
The photo selection screen in Select photo print will appear.
(A) USB flash drive
(B) Memory card
NOTE
- If a memory card or USB flash drive is inserted on the HOME screen, copy standby screen, etc., the photo selection screen in Select photo print will also appear.
- Do not insert memory card and USB flash drive at the same time. Also do not insert two or more memory cards at the same time.
- When Read/write attribute is set to Writable from USB PC or Writable from LAN PC, you cannot print image data from the memory card using the Operation Panel on the machine. To print image data from the memory card, select Device user settings in Device settings of Setup on the HOME screen, and set Read/write attribute to Not writable from PC.
* You can print image data from the USB flash drive regardless of the setting in Read/write attribute.
3. Select photos to print.
(1) Use the
or
button (Scroll Wheel) (C) to display a desired photo.
NOTE
-
may appear on the LCD while reading photos. If you use the or button (Scroll Wheel) to display the photo while appears on the LCD, the desired photo may not be selected.
- If you touch the center Function button (D), the Change view/mode screen will appear. This screen lets you change how photos are displayed. It also lets you select Trimming mode for cropping photos.
(2) Use the [+] or [-] button (E) to specify the number of copies.
NOTE
- If you touch the Color button without specifying the number of copies, one copy of the selected photo will be printed.
(3) Repeat the procedures of (1) and (2) to specify the number of copies for each photo.
NOTE
- If you touch the left Function button (F) to select Menu, you can select various photo print functions other than Select photo print.
4. Start printing.
(1) Touch the right Function button (G) to select Print settings, and confirm the page size, media type, print quality, etc.
Here we confirm that 4"x6" (10x15cm) is selected for Page size and the type of loaded photo paper for Type.
To change the settings, use the
or
button (Scroll Wheel) to select the item to change, and use the
or
button to select an option. After confirming or changing the settings, touch the OK button to return to the photo selection screen.
NOTE
- You can specify Photo fix or Print date on the Print settings screen.
(2) Confirm the number of sheets to be used for printing the selected photos.
(3) Touch the Color button.
The machine starts printing photos.
NOTE
- When you touch the right Function button to select Queue print while printing, the screen will return to the photo selection screen. You can then continue selecting photos for printing.
- Touch the Stop button to cancel printing.
- Printing does not start if you touch the Black button.