Fine-Tuning the Paper Feed Amount (Adj. Fine Feed) (iPF8300)
03-Mar-2010
8200770500
Solution
If the contrast is uneven or banding in different colors appears at 50 mm (2.0 in) intervals in printed documents, try executing "Adj. Fine Feed" during printing to fine-tune the feed amount.
NOTE
- Always execute Adj. Quality before Adj. Fine Feed.
Once you execute Adj. Quality, the Adj. Fine Feed value will revert to 0.
Perform adjustment as follows
1.On the "Tab Selection screen" of the Control Panel, press 
or 
to select the Settings/Adj. tab (
).
or to select the Settings/Adj. tab ().
NOTE
- If the "Tab Selection screen" is not displayed, press the "Menu" button.
2.Press the "OK" button.
The "Set./Adj. Menu" is displayed.
3.Press 
or 
to select "Adj. Fine Feed", and then press the "OK" button.
or to select "Adj. Fine Feed", and then press the "OK" button.4.Press 
or 
to select a setting value in the range -5 to +5, and then press the "OK" button.
or to select a setting value in the range -5 to +5, and then press the "OK" button.The setting is now applied.