Registering the Outside Line Access Number in the R-Key
06-Sep-2011
8200338400
Solution
If your machine is connected through a PBX (Private Branch Exchange), it is necessary to set the access method. If you register the outside line access number in the R-key, you can easily access the outside line.
1. Press 
[Menu].
2. Press [
] or [ 
] to select <SYSTEM SETTINGS>, then press [OK].
If the System Password has been set, enter the System Password using
- 
[numeric keys], then press [OK].
3. Press [ ] or [ ] to select <COMMUNICATIONS>, then press [OK].
4. Press [ ] or [ ] to select <R-KEY SETTINGS>, then press [OK].
5. Press [ ] or [ ] to select <PSTN> or <PBX>.
[Menu]. 2. Press [
] or [ ] to select <SYSTEM SETTINGS>, then press [OK].If the System Password has been set, enter the System Password using
- [numeric keys], then press [OK].3. Press [
] or [ ] to select <COMMUNICATIONS>, then press [OK].4. Press [
] or [ ] to select <R-KEY SETTINGS>, then press [OK].5. Press [
] or [ ] to select <PSTN> or <PBX>.- <PSTN>: Select if your machine is connected to an outside line. If you select <PSTN>, press [OK], then go to step 7.
- <PBX>: Select if your machine is connected through a PBX. If you select <PBX>, press [OK], then go to the next step.
6. Enter the prefix code (up to 20 digits) using - [numeric keys], then press [OK].
7. Press
[Stop/Reset] to return to the standby mode.
- [numeric keys], then press [OK]. 7. Press
[Stop/Reset] to return to the standby mode.