Specifying the Type of the Paper in the Paper Cassette
15-Feb-2008
8200039000
Solution
When you loaded paper in the paper cassette, specify the setting for CASSETTE(n) TYPE (n = 1, 2, 3, 4) using the control panel according to the paper type.
| Paper Type | SETUP Menu CASSETTE(n) TYPE (n = 1, 2, 3, 4) |
Plain paper (64 - 105 g/m ) | PLAIN PAPER |
| PLAIN PAPER L* | |
| Label | LABEL |
- When the paper curls excessively on printing plain paper (64 g/m
)- When the printing speed drops on printing paper of 279.4 mm wide (Letter size) or less continuously
IMPORTANT
- Match the paper type specified in the SETUP menu in the printer and that specified in the printer driver. If they do not match, the message <PC LOAD "size"> appears. In this case, the setting value for CASSETTE(n) TYPE (n = 1, 2, 3, 4) is changed to that in the printer driver by pressing [Online], allowing you to continue printing.
- Be sure to match the type of the paper loaded in the paper cassette and the following settings. If they do not match, this may result in crucial damage to the engine.
- The setting for [Paper Type] in the printer driver*
- The setting for CASSETTE(n) TYPE (n = 1, 2, 3, 4)
* When you are printing from an operating system on which you cannot use the printer driver (such as MS-DOS and UNIX), match the setting for STD PAPER TYPE and the type of the loaded paper [Specifying the Settings for STD PAPER SIZE and STD PAPER TYPE].
- If CASSETTE(n) TYPE (n = 1, 2, 3, 4) is set to MIXED TYPES, the printer does not check the type of the loaded paper against the paper type specified in the printer driver. Make sure that the paper type specified in the printer driver matches the type of the paper loaded in the paper cassette before using the printer.