Clean the Fuser Roller of the Machine
16-Dec-2011
8100138200
Solution
If black streaks appear with printing, the fuser roller in the main unit may be dirty. Should this occur, clean the fusing roller in the following procedure. The roller should also be cleaned each time the toner cartridge is replaced. Load a sheet of blank A4 paper into the multi-purpose tray and start cleaning.
NOTE
- Cleaning the roller takes approximately 130 seconds.
- When some jobs are stored in memory, this function is not available.
Cleaning starts.
NOTE
- Use standard paper as the cleaning paper.
- Throw away the cleaning paper after use.