Connect the Power Cord and Turn On the Machine
16-Dec-2011
8100132000
Solution
1. Connect the power cord into the rear socket on the back side of the machine and the wall outlet, and press the [I] side of the main power switch (A) to ON.
WARNING
This product emits low level magnetic flux. If you use a cardiac pacemaker and feel abnormalities, please move away from this product and consult your doctor.
NOTE
- If the LCD display is turned off, the machine may enter the sleep mode while you are setting up the machine. Press [Energy Saver] to turn the machine back on and continue the setup.
- If <CLOSE COVER/TONER COVER> is displayed, make sure that the toner cover and scanning platform are closed properly. For details, see Install Toner Cartridge.
- If <SET PAPER AGAIN/SET TONER AGAIN> is displayed, check the installation of the toner cartridge and the placement of the paper. For details, see Install Toner Cartridge and Set up the Paper Cassette and Load Paper.
- Any data stored in the memory, including received fax documents, will be deleted if you turn off the main power switch of the machine.
- During electrical storms, disconnect the power cord from the power outlet. (Please note that received documents stored in the machine’s memory may be lost when you unplug the machine.)
- Whenever you unplug the machine, wait at least five seconds before you plug it in again.
- Do not plug the machine into an uninterruptible power supply (UPS).