By continuing to use this website, you are agreeing to our Term of Use and Privacy Policy (including the use of cookies by this site to offer you a better experience).
1. Align the guides (B) on the both edges of the paper cassette to the protrusions (A) inside the machine.
NOTE
Install the paper cassette with the front end tilted upwards.
2. Push the paper cassette down until the hooks (A) on both sides of the paper cassette engage the protrusions (B) inside the machine.
3. Open the front panel of the paper cassette.
4. Slide out the paper guide rail (A).
5. Slide the side paper guides (A) to match the size of paper.
6. Fan the paper stack and even the edges.
7. Load the paper into the paper cassette with the print side up. Make sure the paper stack sits below the small fin (A) on the side paper guide.
8. Adjust the paper guide rail to match the size of paper.
9. Close the front panel of the paper cassette.
10. Match up the edge of the dust cover (A) and the edge of the paper cassette (B), and place the cover on top of the cassette.
11. Attach the document feeder tray on the document feeder.
NOTE
The default paper size/type setting is <A4> and <PLAIN PAPER>. When you load other size and/or type of paper, change the paper size/type setting. For details, see Document Requirements and Paper Requirements.
