Last Updated: 20 Oct 2011 Issue Number: 8100125400

Install Optional Handset

Solution

1. Use a screwdriver to remove the covers on the left side of the machine.

2. Insert the plugs with pins (A) into the holes on the handset cradle.

NOTE

Do not insert the pins all the way into the plugs at this point.

3. Insert the plugs (with the cradle) into the holes on the machine.

4. Carefully push the pins into the plugs as far as they will go.

5. Place the handset on the cradle.

6. Hook the handset cable on the retainer (A) at the back of the machine to retain the slack.

NOTE

If using the optional handset or an external telephone, make sure to set the fax receive mode to <FaxTel> or <MANUAL>. For how to set the receive mode, see Select the Receive Mode that Suits Your Needs.

Popular Searches

Recommended Products

CR-190i II / CR-190i II UV

EOS R6 Mark III (Body)

RF45mm f/1.2 STM

Product Range

Product Category

Install Optional Handset

Solution

1. Use a screwdriver to remove the covers on the left side of the machine.

2. Insert the plugs with pins (A) into the holes on the handset cradle.

3. Insert the plugs (with the cradle) into the holes on the machine.

4. Carefully push the pins into the plugs as far as they will go.

5. Place the handset on the cradle.

6. Hook the handset cable on the retainer (A) at the back of the machine to retain the slack.

Popular Searches

Recommended Products

CR-190i II / CR-190i II UV

EOS R6 Mark III (Body)

RF45mm f/1.2 STM

Product Range

Product Category

Install Optional Handset

Solution

1. Use a screwdriver to remove the covers on the left side of the machine.

2. Insert the plugs with pins (A) into the holes on the handset cradle.

3. Insert the plugs (with the cradle) into the holes on the machine.

4. Carefully push the pins into the plugs as far as they will go.

5. Place the handset on the cradle.

6. Hook the handset cable on the retainer (A) at the back of the machine to retain the slack.

Check My Booking