By continuing to use this website, you are agreeing to our Term of Use and Privacy Policy (including the use of cookies by this site to offer you a better experience).
1. Connect the power cord into the rear socket on the back side of the machine and the wall outlet.
2. The machine enters the standby mode.
CAUTION
This product emits low level magnetic flux. If you use a cardiac pacemaker and feel abnormalities, please move away from this product and consult your doctor.
NOTE
If the LCD display is turned off, the machine may enter the sleep mode while you are setting up the machine. Press [Energy Saver] to turn the machine back on and continue the setup.
If <CLOSE COVER/TONER COVER> is displayed on the LCD, make sure that the toner cover and scanning platform are closed properly. See Install Toner Cartridge.
If <SET PAPER AGAIN/SET TONER AGAIN> is displayed on the LCD, check the installation of the toner cartridge and the placement of the paper. See Install Toner Cartridge.
Any data stored in the memory, including received fax documents, will be deleted if you unplug the power cord from the machine.
During electrical storms, disconnect the power cord from the power outlet. Please note that received documents stored in the machine’s memory may be lost when you unplug the machine.
Whenever you unplug the machine, wait at least five seconds before you plug it in again.
Do not plug the machine into an uninterruptible power supply (UPS).
Check My Booking
Provide your booking code and email address you used for the registration, we will re-send the confirmation email to you.
