Scanning Film with MP Navigator EX

Last Updated : 02-Nov-2007
Issue Number : 8100052100

Solution

1. Set the film on the scanner.

(1) Remove the protective sheet from the document cover.

(2) Place the film.

(3) Close the document cover.

2. Start MP Navigator EX.

Windows

On the Windows desktop, double-click [MP Navigator EX 1.0].

Alternatively, on the Windows taskbar, click [Start], point to [(All) Programs], [Canon Utilities], then [MP Navigator EX 1.0]. Then click [MP Navigator EX 1.0].

The MP Navigator EX one-click mode screen or navigation mode screen opens.

Macintosh

Open [Applications]-[Canon Utilities] folder in the hard disk that you installed MP Navigator EX, and double-click [MP Navigator EX 1.0] icon. Then click [MP Navigator EX 1.0].

The MP Navigator EX one-click mode screen or navigation mode screen opens.

One-click Mode Screen

Navigation Mode Screen

If the one-click mode screen opens, go to Step 4.

3. Point to [One-click].

4. Click the corresponding icon.

You can scan films using [Copy], [Print], [Save], [Photo-1] and [Photo-2] buttons.

In this example, the [Save] button is used.

The [Save] dialog box opens.

5. Select the type of film, [Film(Auto mode)] or [Auto Mode].

Negative Film	Select this to scan 35 mm negative film (film strips).
Positive Film	Select this to scan 35 mm positive film (film strips or mounted slides).
Film(Auto mode)	Automatically detects negative or positive film.
Auto Mode	Automatically detects the type of document or film to be scanned.

IMPORTANT

To scan mounted negative slides or 120 format films, scan in ScanGear's Advanced Mode.

6. Select [Resolution].

7. Click [Scan].

8. Check the frames you want to scan and click [Scan].

The selected frames are scanned. When scanning is completed, the scanned images are processed according to the function assigned to the button you pressed.