29-Nov-2017
0400357702
I have read and understood the disclaimer below
and wish to download the designated software
Firmware Version 1.0.4.1.00 incorporates the following enhancements.
1. Adds [Linear]* to the gamma curve setting:
- [Custom Picture] > [Fine Tuning] > [Gamma] > [Linear]
*Does not apply a gamma curve. Creates a linear relationship between the luminance input and output.
2. The following features are enabled for the CN-E70-200mm T4.4 L IS KAS S:
- Displaying the model name of the lens when attached.
- Support for Peripheral illumination correction.
- Manual control of the iris with camera's joystick.
- Control of focus, zoom and iris using the separately-sold Remote Controller RC-V100.
- Support for One shot autofocus.
- Automatic aperture and push auto iris functions.
- Start/stop recording on the separately-sold lens grip ZSG-C10.
3. Adds Peripheral Illumination Correction for the following lenses:
- EF 70-300mm f/4-5.6 IS II USM
- EF 16-35mm f/2.8L III USM
- EF-S 35mm f/2.8 Macro IS STM
- EF 85mm f/1.4L IS USM
4. Adds [NU protocol] to the other functions setting:
- [Other Functions] > [REMOTE B Term.] > [NU Protocol]
5. When the camera is turned off the IS mechanical lock will be active regardless of the position of the switch.
Caution:
Firmware Version 1.0.4.1.00 is for ME20F-SH cameras with Firmware Version 1.0.0.1.00 - 1.0.3.1.00. If your camera's firmware is already Version 1.0.4.1.00, it is not necessary to update the firmware. Once the camera is updated to the latest version, it cannot be restored to a previous version.
For further information, please refer to the latest version of the unit's Instruction Manual that is released with the firmware update.
Preparations for the Firmware Update:
After the Firmware update has been performed, the date/time settings and the camera's menu settings will be reset. Please configure the date/time settings and the camera's menu settings to their pre-update values after the firmware update is complete.
The downloaded folder contains the firmware (file name: VLF4.FIM / file size: 22,741,020 bytes), and instructions on the firmware update procedures (a PDF file in four languages: Japanese, English, French and Spanish). Before starting the firmware update operations, please be sure to carefully confirm your understanding of these instructions.
The following things are required to perform this firmware update:
1. A ME20F-SH Multipurpose Camera
2. A computer (OS: Windows 10, Windows 8.1, Windows 8, Windows 7 SP1)
3. A microSD / microSDHC / microSDXC card (all commercially available)
4. An microSD card reader/writer (commercially available)
5. External power supply (commercially available)
6. The firmware (the downloaded file)
History
Changes Version 1.0.3.1.00:
1. Three camera modes have been added:
- Tv: Shutter speed is selectable. Iris, Gain and ND Filter* are set automatically.
- Av: Iris is selectable. Shutter speed, Gain and ND Filter* are set automatically.
- AGC: Shutter speed and Iris are selectable. Gain and ND Filter* are set automatically.
*ND Filter can alsobe set manually.
2. The following features are enabled for the CN-E18-80mm and T4.4 L IS KAS S:
- Saving and displaying metadata, such as the model name and the focal distance of the lens when attached.
- Support for Peripheral Illumination Correction.
- Manual Iris control via the camera's joystick.
- Control of focus, zoom and iris using the separately-sold Remote Controller RC-V100.
- One shot autofocus.
- Automatic aperture and push auto iris functions.
- Operation of REC start/stop by the separately-sold ZSG-C10.
3. Adds Peripheral Illumination Correction for the following lenses:
- EF 100-400mm f/4.5-5.6L IS II USM
- EF 35mm f/1.4L II USM
- EF 24-105mm f/4L IS II USM
4. Adds chroma-key correction function.
5. Adds three white balance modes when the camera is set to Auto: custom White Balance Set, Preset and Color temperature.
6. Adds 25PsF on output format.
7. Adds [59.94P(i)]* and [50.00P(i)]* output setting for Monitor terminal.
• When the frame rate is set to 59.94P (NTSC) or 50.00P (PAL), the 3G/HD-SDI 1 / MONITOR terminal can be set to output interlaced signal.
* When using this setting 3G/HD-SDI 2 will output progressive signal.
Changes Version 1.0.2.1.00:
1. Adds a function to turn off the onscreen display information automatically during recording.
2. Adds 3x magnification to the digital tele-converter.
3. Adds aspect marker options.
- Aspect ratio can be selected from 4:3, 4:3 (S35mm), 1.66:1, 1.85:1 and 2.39:1
4. Adds an auto slow shutter ON/OFF function.
- When set to [OFF] and the camera is set to [Auto] mode, the shutter speed will not drop below the set frame rate.
Changes Version 1.0.1.1.00:
1. Corrects a phenomenon in which after long hours of consecutive power conduction, the power of the camera cannot be turned off from the main power switch or the camera cannot be initialized from the menu. (After the power source is detached and attached, camera operations are restored.)
All software, programs (including but not limited to drivers), files, documents, manuals, instructions or any other materials (collectively, “Content”) are made available on this site on an "as is" basis.
Canon India Pvt. Ltd., and its affiliate companies (“Canon”) make no guarantee of any kind with regard to the Content, expressly disclaims all warranties, expressed or implied (including, without limitation, implied warranties of merchantability, fitness for a particular purpose and non-infringement) and shall not be responsible for updating, correcting or supporting the Content.
Canon reserves all relevant title, ownership and intellectual property rights in the Content. You may download and use the Content solely for your personal, non-commercial use and at your own risks. Canon shall not be held liable for any damages whatsoever in connection with the Content, (including, without limitation, indirect, consequential, exemplary or incidental damages).
You shall not distribute, assign, license, sell, rent, broadcast, transmit, publish or transfer the Content to any other party. You shall also not (and shall not let others) reproduce, modify, reformat, disassemble, decompile or otherwise reverse engineer or create derivative works from the Content, in whole or in part.
You agree not to send or bring the Content out of the country/region where you originally obtained it to other countries/regions without any required authorization of the applicable governments and/or in violation of any laws, restrictions and regulations.
By proceeding to downloading the Content, you agree to be bound by the above as well as all laws and regulations applicable to your download and use of the Content.