10-Jan-2013
0400034802
I have read and understood the disclaimer below
and wish to download the designated software
< Firmware Update Tool >
You can use this program to update the printer firmware version.
< Media Information File >
Media Information Filecan be registered on the printer control panel and in the printer driver by using the Media Configuration Tool.
< Firmware Update Tool >
Modifications from Ver.1.23 to Ver.1.24
1. Optimized the print head control.
2. The problem that the community name setting in SNMP setting was not processed correctly has been fixed.
3. Fixed the issue that the illustration of the release lever is displayed on LCD even though it does not exist.
Modifications from Ver.1.21 to Ver.1.23
1. The control of waste ink has been optimized.
2. The infrequent failure that a job sent during transition to sleep mode might be cancelled has been fixed.
3. The fairly infrequent failure of printer not retrieving from sleep mode has been fixed.
Modifications from Ver.1.20 to Ver.1.21
1. Change of specifications of printer color calibration
* This modification requires application of "MIF version 000500000000 or later" released
2. The failure of user password settings in RemoteUI has been fixed.
Modifications from Ver.1.08 to Ver.1.20
1. Improved display of remaining time of printing
Modifications from Ver.1.05 to Ver.1.08
1. The failure that printer might not retrieve from sleep mode in rare cases has been fixed.
Modifications from Ver.1.03 to Ver.1.05
1. The problem that the number of days after printhead installation might be incorrect at the first installation has been fixed.
< Media Information File >
Modifications from Ver.0006 to Ver.0007 (MCT Ver.4.02)
1. The Glossy Paper/Semi-Glossy Paper listed below have been supported.
-Glossy Photo Paper 170gsm
-Satin Photo Paper 170gsm
2. It has been improved to reduce the JAM error (paper jam).
Modifications from Ver.0005 to Ver.0006 (MCT Ver.4.02)
1. Media information of Lightweight Gloss Proof Paper and Lightweight Matte Proof Paper has been added.
Modifications from Ver.0004 to Ver.0005 (MCT Ver.4.02)
1. The fairly infrequent problem of colors not adjusted after performing calibration on the main body has been fixed.
Modifications from Ver.0003 to Ver.0004 (MCT Ver.4.02)
1. The failure that a calibration error occurs in rare occasions when performing calibration, has been fixed.
Modifications from Ver.0002 to Ver.0003 (MCT Ver.4.02)
1. Media information of Premium Glossy Paper 2 280 and Premium Semi-Glossy Paper 2 280 has been added.
Modifications from MCT Ver.4.02 to MIF Ver.0002
1. The profile of [Perceptual (People/ Dark Areas)] has been changed so that the color reproducibility and gradation are improved.
2. The profiles of "Fine Art (Photo)" and "Fine Art (Photo HW)" have been changed.
< Firmware Update Tool >
* Hardware: Any computer running the software listed above.
* Interface Connectivity:
The printer and computer where this program is executed must be connected with either of the following methods.
- Connected via a TCP/IP network and capable of printing via the network.
- Connected via a USB or IEEE 1394 port cable and capable of printing as a local printer.
Note: If you are using IEEE1394, IEEE1394 Class Driver is needed.
< Media Information File >
Install the Media Configuration Tool Ver.4.02 if it is not installed.
Operating Systems:
iPF6350 Media Configuration Tool Version 4.02 for Windows
Microsoft Windows 8, English edition
Microsoft Windows 7, English edition
Microsoft Windows Server 2008, English edition
Microsoft Windows Vista, English edition
Microsoft Windows Server 2003 R2, English edition
Microsoft Windows Server 2003, English edition
Microsoft Windows XP Professional/Home Edition, English edition
Microsoft Windows 2000 Professional/Server, English edition
< Firmware Update Tool >
* You must log into Windows as an Administrator before the installation.
* Before You start the firmware version update program, close any other applications that are running.
* Do not try to use the printer while the firmware version update program is running. If a print job is executing, cancel the print job or wait for the job to finish before You execute the version update program.
* Never switch off the target printer while the firmware version update program is running.
* If the firmware version update fails while writing to the flash ROM, You may not be able to start the printer. In this case, contact a Canon service center or the dealer where You purchased the printer.
For more about installation the procedure, please refer to "Guide\iPF6350\Install-6350_E.pdf".
< Firmware Update Tool >
(1) Switch the printer on.
(2) Decompress it on your computer hard disk.
(3) Execute the setup file. The imagePROGRAF Firmware Update Tool is installed.
(4) From the Start menu, select Programs to execute imagePROGRAF Firmware Update Tool.
< Media Information File >
For more about installation the procedure, please refer to the install guide.
All software, programs (including but not limited to drivers), files, documents, manuals, instructions or any other materials (collectively, “Content”) are made available on this site on an "as is" basis.
Canon India Pvt. Ltd., and its affiliate companies (“Canon”) make no guarantee of any kind with regard to the Content, expressly disclaims all warranties, expressed or implied (including, without limitation, implied warranties of merchantability, fitness for a particular purpose and non-infringement) and shall not be responsible for updating, correcting or supporting the Content.
Canon reserves all relevant title, ownership and intellectual property rights in the Content. You may download and use the Content solely for your personal, non-commercial use and at your own risks. Canon shall not be held liable for any damages whatsoever in connection with the Content, (including, without limitation, indirect, consequential, exemplary or incidental damages).
You shall not distribute, assign, license, sell, rent, broadcast, transmit, publish or transfer the Content to any other party. You shall also not (and shall not let others) reproduce, modify, reformat, disassemble, decompile or otherwise reverse engineer or create derivative works from the Content, in whole or in part.
You agree not to send or bring the Content out of the country/region where you originally obtained it to other countries/regions without any required authorization of the applicable governments and/or in violation of any laws, restrictions and regulations.
By proceeding to downloading the Content, you agree to be bound by the above as well as all laws and regulations applicable to your download and use of the Content.