18-Jun-2012
0400011002
I have read and understood the disclaimer below
and wish to download the designated software
You can use this program to update the printer firmware version.
Modifications from Ver.1.51 to Ver.1.52
1. The problem that the community name setting in SNMP setting was not processed correctly has been fixed.
Modifications from Ver.1.47 to Ver.1.51
1. The control of waste ink has been optimized.
2. The infrequent failure that a job sent during transition to sleep mode might be cancelled has been fixed.
3. The fairly infrequent failure of printer not retrieving from sleep mode has been fixed.
Modifications from Ver.1.39 to Ver.1.47
1. A new print mode has been added for Glossy Paper/ Coated Paper/ Plain Paper.
2. The failure of recovery operation when out of paper has been fixed.
*To use the new function, you need to install the following software:
Printer Driver: Ver.4.40
Media Configuration Tool: Ver.2.8404
Software:
Mac OS X v10.2 - v10.5, English edition
Hardware:
The softwares above require the Intel processor or PowerPC of the Macintosh Series computers.
Interface Connectivity:
The printer and computer where this program is executed must be connected with either of the following methods.
- Connected via an AppleTalk network and capable of printing via the network.
- Connected via an Bonjour and capable of printing via the network.
- Connected via a USB or FireWire port cable and capable of printing as a local printer.
- Before you start the firmware version update program, close any other applications that are running.
- Before executing the firmware update of a printer connected to the network, make sure AppleTalk is selected "Active".
- Do not try to use the printer while the firmware version update program is running.
If a print job is executing, cancel the print job or wait for the job to finish before you execute the version update program.
- Never switch off the target printer while the firmware version update program is running.
- If the firmware version update fails while writing to the flash ROM, you may not be able to start the printer. In this case, contact a Canon service center or the dealer where you purchased the printer.
(1) Switch the printer on.
(2) Decompress it on your computer hard disk.
(3) Execute the setup file. The imagePROGRAF Firmware Update Tool is installed.
(4) From the Start menu, select Programs to execute imagePROGRAF Firmware Update Tool.
All software, programs (including but not limited to drivers), files, documents, manuals, instructions or any other materials (collectively, “Content”) are made available on this site on an "as is" basis.
Canon India Pvt. Ltd., and its affiliate companies (“Canon”) make no guarantee of any kind with regard to the Content, expressly disclaims all warranties, expressed or implied (including, without limitation, implied warranties of merchantability, fitness for a particular purpose and non-infringement) and shall not be responsible for updating, correcting or supporting the Content.
Canon reserves all relevant title, ownership and intellectual property rights in the Content. You may download and use the Content solely for your personal, non-commercial use and at your own risks. Canon shall not be held liable for any damages whatsoever in connection with the Content, (including, without limitation, indirect, consequential, exemplary or incidental damages).
You shall not distribute, assign, license, sell, rent, broadcast, transmit, publish or transfer the Content to any other party. You shall also not (and shall not let others) reproduce, modify, reformat, disassemble, decompile or otherwise reverse engineer or create derivative works from the Content, in whole or in part.
You agree not to send or bring the Content out of the country/region where you originally obtained it to other countries/regions without any required authorization of the applicable governments and/or in violation of any laws, restrictions and regulations.
By proceeding to downloading the Content, you agree to be bound by the above as well as all laws and regulations applicable to your download and use of the Content.