Firmware Update Tool Ver.24.00 (Windows x64)

    20-Oct-2021
    0200357802

    Download

    I have read and understood the disclaimer below
    and wish to download the designated software

    OS

    • Windows Server 2022
    • Windows Server 2019 (x64)
    • Windows Server 2016 (x64)
    • Windows Server 2012 R2 (x64)
    • Windows Server 2012 (x64)
    • Windows Server 2008 R2 (x64)
    • Windows Server 2008 (x64)
    • Windows Server 2003 R2 (x64)
    • Windows Server 2003 (x64)
    • Windows 11
    • Windows 10 (x64)
    • Windows 8.1 (x64)
    • Windows 8 (x64)
    • Windows 7 (x64)
    • Windows Vista (x64)

    Outline

    You can use this program to update the printer firmware version.

    System requirements

    Use this program with the systems and the operating environments below.

    Software:
    Windows 11
    Windows 10 (64bit)
    Windows 8.1 (64bit)
    Windows 8 (64bit)
    Windows 7 (64bit)
    Windows Vista (64bit)

    WIndows Server 2022
    Windows Server 2019 (64bit)
    Windows Server 2016 (64bit)
    Windows Server 2012 R2 (64bit)
    Windows Server 2012 (64bit)
    Windows Server 2008 R2 (64bit)
    Windows Server 2008 (64bit)
    Windows Server 2003 R2 (64bit)
    Windows Server 2003 (64bit)

    (Note)
    - Not available on 32-bit version of Windows.
    - For the Windows OS, use the latest version of Service Pack.
    - The supported OS conforms to the system requirements of the product.

    Hardware:
    Any computer running the software listed above.

    Printers:
    Canon imagePROGRAF series

    Interface Connectivity:
    The printer and computer where this program is executed must be connected with either of the following methods.
    - Connected via a TCP/IP network and capable of printing via the network.
    - Connected via a USB or IEEE 1394 port cable and capable of printing as a local printer.

    (Note)
    If you are using IEEE1394, IEEE1394 Class Driver is needed.

    Caution

    - You must log into Windows as an Administrator before the installation.
    - Before you start the firmware version update program, close any other applications that are running.
    - Do not try to use the printer while the firmware version update program is running. If a print job is executing, cancel the print job or wait for the job to finish before you execute the version update program.
    - Never switch off the target printer while the firmware version update program is running.
    - If you are unable to connect to the Internet to get the latest information, perform the following procedure.
    1. Access the Canon website from a computer that can connect to the Internet and download the firmware corresponding to your printer.
    2. Copy the downloaded firmware to the computer where this program is installed.
    3. Run this program, select "Specify the Firmware", and specify the downloaded firmware.
    - If the firmware version update fails while writing to the flash ROM, you may not be able to start the printer. In this case, contact a Canon service center or the dealer where you purchased the printer.

    Setup instruction

    (1) Switch the printer on.
    (2) When you have downloaded the file, decompress it on your computer hard disk.
    (3) Execute the setup file. The imagePROGRAF Firmware Update Tool is installed.
    (4) From the Start menu, select Programs to execute imagePROGRAF Firmware Update Tool.

    File information

    1. File name : FUT-Win64-2400.exe
    2. File version : 24.00
    3. File size : 6076KB

    Disclaimer

    All software, programs (including but not limited to drivers), files, documents, manuals, instructions or any other materials (collectively, “Content”) are made available on this site on an "as is" basis.

    Canon India Pvt. Ltd., and its affiliate companies (“Canon”) make no guarantee of any kind with regard to the Content, expressly disclaims all warranties, expressed or implied (including, without limitation, implied warranties of merchantability, fitness for a particular purpose and non-infringement) and shall not be responsible for updating, correcting or supporting the Content.

    Canon reserves all relevant title, ownership and intellectual property rights in the Content. You may download and use the Content solely for your personal, non-commercial use and at your own risks. Canon shall not be held liable for any damages whatsoever in connection with the Content, (including, without limitation, indirect, consequential, exemplary or incidental damages).

    You shall not distribute, assign, license, sell, rent, broadcast, transmit, publish or transfer the Content to any other party. You shall also not (and shall not let others) reproduce, modify, reformat, disassemble, decompile or otherwise reverse engineer or create derivative works from the Content, in whole or in part.

    You agree not to send or bring the Content out of the country/region where you originally obtained it to other countries/regions without any required authorization of the applicable governments and/or in violation of any laws, restrictions and regulations.

    By proceeding to downloading the Content, you agree to be bound by the above as well as all laws and regulations applicable to your download and use of the Content.