Erasing images (PowerShot G1 X Mark II)
Solution
This section explains how to erase images.
IMPORTANT
- Be careful when erasing images, because they cannot be recovered. However, protected images cannot be erased.
You can erase unwanted images individually.
1. Press the <Playback> (
) button to turn on the camera.
) button to turn on the camera.2. Press the <
><
> buttons or turn the <Control dial> (
) to choose the image you want to erase.
><> buttons or turn the <Control dial> () to choose the image you want to erase.
3. Press the <Single image erase> (
) button.
) button.
4. The following screen appears.
After [Erase?] is displayed, press the <><> buttons or turn the <> dial to choose [Erase], and then press the <FUNC./SET> (
) button.
><> buttons or turn the <> dial to choose [Erase], and then press the <FUNC./SET> () button.6. The current image is now erased.
REFERENCE
- To cancel erasure, press the <><> buttons or turn the <> dial to choose [Cancel], and then press the <FUNC./SET> () button.
- Pressing the <> button while [
] images are displayed will give you the option of choosing [Erase 
], [Erase JPEG], or [Erase +JPEG] for deletion.
You can erase images that are in a specified range.
1. Press the <Playback> () button to turn on the camera.
) button to turn on the camera.2. Press the <
> button.
> button.3. The following screen appears.
Press the <><> buttons to choose the <Playback> (
) tab.
Press the <
><
> buttons or turn the <Control dial> () to choose [Erase], and then press the <FUNC./SET> () button.4. The following screen appears.
Press the <><> buttons or turn the <Control dial> () to choose [Select Range], and then press the <FUNC./SET> () button.
><> buttons or turn the <Control dial> () to choose [Select Range], and then press the <FUNC./SET> () button.REFERENCE
- You can select [Select] to individually specify the images that you want to erase.
- You can select [All Images] to erase all images at once.
5. The following screen appears.
Check whether the [First Image] is selected, and then press the <FUNC./SET> () button.
) button.6. The following screen appears
Press the <><> buttons or turn the <> to choose the [First Image] in the series of images that you want to erase, and then press the <FUNC./SET> () button.
><> buttons or turn the <> to choose the [First Image] in the series of images that you want to erase, and then press the <FUNC./SET> () button.7. The following screen appears.
Press the <><> buttons to select the [Last image], and then press the <FUNC./SET> () button.
><> buttons to select the [Last image], and then press the <FUNC./SET> () button.8. The following screen appears.
Press the <><> buttons or turn the <> to choose the last image you want to erase, and then press the <FUNC./SET> () button.
><> buttons or turn the <> to choose the last image you want to erase, and then press the <FUNC./SET> () button.9. The following screen appears
Press the <><> buttons to choose [Erase], and then press the <FUNC./SET> () button to erase the images.
><> buttons to choose [Erase], and then press the <FUNC./SET> () button to erase the images.