How do I recharge the battery? (EOS REBEL T3/EOS 1100D)
10-Feb-2011
8201014500
Solution
To recharge the battery supplied with your camera, follow the instructions below.
When recharging the battery, also see Precautions for Charging Battery Pack.
1. Remove the protective cover.
2. As shown in the illustration, attach the battery securely.
To detach the battery, follow the above procedure in reverse.
3. Recharge the battery.
[For LC-E10]
As shown by the arrow, flip out the battery charger's prongs and insert the prongs into a power outlet.
[For LC-E10E]
Connect the power cord to the charger and insert the plug into the power outlet.
Recharging starts automatically and the charge lamp turns orange.
When the battery is fully recharged, the full-charge lamp will turn green.
NOTE
- It takes approx. 2 hours to fully recharge a completely exhausted battery at 23℃ / 73℉. The time required to recharge the battery depends on the ambient temperature and the battery’s charge level.
- For safety reasons, recharging in low temperatures (6℃ - 10℃ / 43℉ - 50℉) will take a longer time (up to 4 hours).
CAUTION
Use of genuine Canon accessories is recommended.
This product is designed to achieve excellent performance when used with genuine Canon accessories. Canon shall not be liable for any damage to this product and/or accidents such as fire, etc., caused by the malfunction of non-genuine Canon accessories (e.g., a leakage and/or explosion of a battery pack). Please note that this warranty does not apply to repairs arising out of the malfunction of non-genuine Canon accessories, although you may request such repairs on a chargeable basis.