Editing the Movies with the Camera (Editing the First and Last Scenes of a Movie)

Last Updated : 11-Nov-2009
Issue Number : 8200674700

Solution

With your camera, you can edit out the first and last scenes of a movie in 1-sec. increments. You can select [Overwrite] to save and overwrite the original movie, or [New file] to save the movie as a new movie. This operation is carried on the movie playback screen.

1. Set the power switch to < ON >.

2. Press the <

> to display the image.

3. Turn the < Quick Control Dial > to select the image.

During the single-image display, the [ ] icon displayed on the upper left indicates that it is a movie.
During the index display, the perforation on the left edge of the image indicates that it is a movie. Movies cannot be played on the index display, so press < SET > to switch to the single-image display.

4. On the single-image display, press < SET >.

The movie playback panel will appear on the bottom.

5. Turn the < Quick Control Dial > to select [

], then press < SET >.

The editing screen will be displayed.

6. Specify the parts to be edited out.

6-1. Turn the < Quick Control Dial > to select either [

] (Cut beginning) or [

] (Cut end), then press < SET >.

6-2. Press the <

> (Multi-controller) to see the previous or next frames. To edit the first scene of a movie, press the <

> (Multi-controller) to the right, and to edit the last scene of a movie, press the <

> (Multi-controller) to the left. Holding it down will fast forward the frames.

Turn the < Quick Control Dial > dial to browse frame-by-frame.

After deciding which part to edit out, press < SET >.

The portion highlighted in blue on the top of the screen is what will remain.

7. Check the editing.

Turn the < Quick Control Dial > to select [ ] and press < SET > to playback the portion highlighted in blue.
To change the editing, go back to step 6.
To cancel the editing, turn the < Quick Control Dial > to select [ ] and press < SET >.