How to perform borderless printing
26-Nov-2007
8000489401
| Category | : Printing Difficulties |
| Description | : How to perform borderless printing |
How to perform borderless printing with a memory card
After images stored in the memory card are read, it is possible to perform borderless printing from the printer.
The following procedure is an example for Single-photo print.
Note:
When setting Photo Index print or Sticker print, borderless printing is not possible.
1. Ensuring that the printer is powered on, pull down the paper output tray.
2. Load the paper to be printed in the auto sheet feeder or the cassette.
3. Insert the memory card into the card slot and press the Menu button.
4. Set the paper settings.
4-1. Press the Settings button.
The Settings screen is displayed.
The Settings screen is displayed.
4-2. Use the up / down cursor button to select the item to set.
4-3. Use the right or left cursor button to select the setting.
4-4. Press the Settings button to complete setting changes.
<1> Page size: You can specify the page size.
4" x 6" ( 101.6 x 152.4 ) / 5" x 7" ( 127 x177.8 ) / Credit card / 8.5" x 11" ( 215.9 x 279.4 ) / A4
<2> Media type: You can specify the media type.
Plain paper / Photo Paper Plus Glossy / Matte Photo Paper / Glossy Photo Paper / Photo Paper Pro
<3> Print quality: You can adjust image quality.
Standard, High
<4> Border: You can specify prints with a border / without a border.
Bordered / Borderless
Memo:
Borderless cannot be selected when Plain paper is selected as the media type.
<5> Date/file no.: You can print the date the photo was taken / file numbers (DCF numbers) on photos.
No date/file no., Print date only, Print file no. only, Print date & file no.
5. Use the right / left cursor button to select Single-photo print and press the OK button.
6. Use the right / left cursor button to select the image you want to print, and press the Print button.
7. Use the up / down cursor button to specify the number of print copies, and press the Print button.
Printing will start.
Printing will start.