Troubleshooting Paper Abrasion and Blurry Images (Head Height) (iPF6300/iPF6350)

    03-Mar-2010
    8200761000

    Solution

      If the Printhead rubs against paper during printing, adjusting the Printhead height may improve results.
      If image edges are blurred, it may help to lower the Printhead.
      NOTE

      1.On the "Tab Selection screen" of the Control Panel, press or to select the Paper tab ().


      NOTE
      • If the "Tab Selection screen" is not displayed, press the "Menu" button.

      2.Press the "OK" button.
      The "Paper Menu" is displayed.

      3.Press or to select "Paper Details", and then press the "OK" button.

      4.Press or to select the type of paper, and then press the "OK" button.

      5.Press or to select "Head Height", and then press the "OK" button.

      6.Press or to select the desired setting value, and then press the "OK" button.
      NOTE
      • If it is set to "Automatic", the current setting value is shown in "Automatic".
      • Depending on the type of paper, some setting values may not be available.