24-Mar-2020
0400107502
I have read and understood the disclaimer below
and wish to download the designated software
Printer firmware for iPF760/iPF765.
Modifications from Ver.1.14 to Ver.1.50
1.Security enhancement (SHA-2) in connecting remote services.
2.Support for TLS v1.1 and TLSv1.2.
Modifications from Ver. 1.12 to Ver.1.14
1. The failure that occurs in rare case in firmware updating was modified.
2. The paper jam error that occurs in rare case in adjusting print head position with using cut papers was modified.
Modifications from Ver. 1.10 to Ver.1.12
1. modification of the failure that the data is printed dividing into two pages, or that the data is printed insufficiently when printing a particular HP-GL2 file.
2. modification of the failure that hanging up occurs after printing a particular HP-GL2 file.
Modifications from Ver. 1.07 to Ver.1.10
1. Following improvement was implemented for HP-GL/2 print function.
- Priority of HP-GL/2 process task was optimized to improve the network response delay.
- Printing failure due to HP-GL/2 data dividing was modified.
- Printing failure due to HP-GL/2 data combining was modified.
- The failure occurs at printing HP-GL/2 that includes large amount of linear data was modified.
- "Memory overflow" warning display error during long time intermittent printing was modified.
- The failure which fails to finish the job when sending data without end indicator in HP-GL/2 was modified.
- Printing failure which occurs to have non-printed band area over print head width when printing in particular HP-RTL data was modified.
- Solid black printing when communication is disconnected during HP-RTL data printing was modified.
- The handling method of transparent layer in JP-GL/2 data has been improved.
2. The failure which restarts right after power is on when accessing printers through RemoteUI or IPP (Internet Printing Protocol) was modified.
3. Panel display error was modified.
4. The failure which stops access mediation function when using accounting function in status monitor was modified.
Modifications from Ver.1.05 to Ver.1.07
1. The specific period of time for auto cleaning execution has been modified.
There could be a case that cleaning failure occurs on the color side when printing only with monochrome. To address this issue, the period of time for auto cleaning execution on the color side has been modified as follows.
Before: Auto cleaning is executed within the specific period of time depending on the usage environment (temperature/humidity).
After: Auto cleaning is executed on a regular basis.
Modifications from Ver.1.00 to Ver.1.05
1. Enhancement and improvement of HP-GL/2 function have been implemented. (iPF765)
Following setting items have been added to the HP-GL/2 menu on the control panel.
- [Over Size]: Function to print with setting margins
- [Print Centered]: Function to print in the center of media
- [Enlarge/Reduce]: Function to configure the scale factor (25%-400%)
- [Line width correction]: Function to set correction value of line width
(Target line width can be configured with [Pen Setup])
- [Detect image size]: Function to analyze image data and detect image size
Along with the addition of the setting items above, the function of
[Page Size Process 1] and [Page Size Process 2] have been deleted.
2. Fixed the failure that white line appears on the image under a certain condition.
3. Fixed the failure that the printer does not recover normally when recovering from Sleep Mode.
4. Fixed the problem that the community name setting in SNMP setting is not processed correctly.
5. Maximum sleep timer setting has been changed. [240min] --> [210min]
Install the Firmware Update Tool if it is not installed.
All software, programs (including but not limited to drivers), files, documents, manuals, instructions or any other materials (collectively, “Content”) are made available on this site on an "as is" basis.
Canon India Pvt. Ltd., and its affiliate companies (“Canon”) make no guarantee of any kind with regard to the Content, expressly disclaims all warranties, expressed or implied (including, without limitation, implied warranties of merchantability, fitness for a particular purpose and non-infringement) and shall not be responsible for updating, correcting or supporting the Content.
Canon reserves all relevant title, ownership and intellectual property rights in the Content. You may download and use the Content solely for your personal, non-commercial use and at your own risks. Canon shall not be held liable for any damages whatsoever in connection with the Content, (including, without limitation, indirect, consequential, exemplary or incidental damages).
You shall not distribute, assign, license, sell, rent, broadcast, transmit, publish or transfer the Content to any other party. You shall also not (and shall not let others) reproduce, modify, reformat, disassemble, decompile or otherwise reverse engineer or create derivative works from the Content, in whole or in part.
You agree not to send or bring the Content out of the country/region where you originally obtained it to other countries/regions without any required authorization of the applicable governments and/or in violation of any laws, restrictions and regulations.
By proceeding to downloading the Content, you agree to be bound by the above as well as all laws and regulations applicable to your download and use of the Content.